How Should Oliver Work Boots Fit? 4 Questions Before You Buy

How Should Oliver Work Boots Fit? 4 Questions Before You Buy

A pair of Oliver work boots can feel grand when you first stand up in them. Walk around for a few minutes, bend down, knee down, stoop and go up a step, and you’ll get a much better idea of the fit. If you’re buying Oliver work boots online, here are four things worth checking before you wear them to work. The same checks are useful if you’re trying on another brand of safety boots.

1. What Size Oliver Work Boots Should I Order?

Start with your usual UK work boot size, then check the size guide for the Oliver model you’re ordering. If you’re using an old pair as a reference, check which size scale is printed on the label. Oliver boots can show both UK/Australian and US sizes.

Try on both boots with the socks you normally wear to work. If you wear thicker socks in winter, try those too. Go by how the larger foot feels, especially if one boot feels snug and the other feels fine. Oliver boots have in between sizes so these might be better for you in case they are either too big or small for you, but again depending on the socks you wear. Bamboo work socks tend to be thicker so half a size up in the work boot might be what is needed for a better fit.

Oliver footwear size conversion chart showing UK/Australian, metric and USA sizes for men and ladies

2. How Much Room Should There Be At The Toes?

Once the boots are fastened, you should be able to move your toes without them pressing against the safety cap. Walk around indoors and pay attention to the longest toe. If it hits the front when you take a step, try a different size or fit. Your toes shouldn't be hitting the toe cap or up against it.

Oliver also gives a handy way to check the length. With the boot unfastened, slide your foot forward until your toes just touch the front. Oliver suggests checking for about a finger’s width behind your heel. Then fasten the boot and walk around. That second check is where you’ll notice whether the width and heel feel right.

3. Why Does My Heel Lift When I Walk?

First, fasten the boot properly and walk again. On a side-zip boot with adjustable laces, set the laces for your foot, then close the zip. With a BOA boot, adjust the dial until the boot feels snug without squeezing across the top of your foot.

If your heel keeps lifting and rubbing, or your foot slides forward as you walk, try a different size or boot shape. Your foot shouldn't have any major movement inside the boot. A boot can have enough length at the toes and still feel too loose at the heel.

4. Will Tight Safety Boots Loosen Up?

The upper can soften as you wear the boot. If the safety toe cap is already pressing on your toes, though, choose a different fit before taking the boots to work. That pressure is worth sorting out while you’re still trying them on indoors.

If the length feels right but the sides squeeze, try another model with a roomier shape around the forefoot. Going up a full size adds length, so check whether it also leaves your heel moving about.

If you’re comparing a side zip, a pull-on dealer boot or a BOA style, you can browse the Oliver work boots range at WTH Supplies. Check the size options on the exact model you’re considering and try your usual work socks with it when it arrives.